The fan of the Brapu BPM-BL series blower type mechanical ventilation cooling tower is set at the cooling tower inlet, with a square frame structure and an outer plate composed of hot-dip galvanized steel or stainless steel. It can safely transfer wind, earthquake, and mechanical loads to the supporting anchor bolts of the equipment, and has strong wind and seismic resistance. The outlet area is larger than that of the suction type mechanical ventilation cooling tower with the same water spraying area. The outlet flow rate of the blower type mechanical ventilation cooling tower is relatively small, which is much lower than the flow rate of the mechanical ventilation cooling tower. Therefore, the blower type cooling tower is more susceptible to the influence of environmental natural wind to form hot air flow. The Brapu blast cooling tower has clear design principles and methods for its own reflux rate, tower layout spacing, etc. It has the characteristics of stable operation, low energy consumption, long service life, and low noise. As the fans, motors, and reducers are installed on the ground outside the tower body, maintenance, management, and inspection are very convenient.
For more technical questions, please contact Brapu engineering technicians